Product
Nanovna-F Mini vector network analyzer
Introduction
NanoVNA-F is a product based on the Open Source Project of NanoVNA(https://ttrf.tk/kit/nanovna/). The measurement range is 50k-1GHz.
NanoVNA-F can measure S parameters, Voltage Standing Wave Ratio(SWR), Phase, Group Delay, Smith chart and more.
NanoVNA-F hardware features include and are not limited to the following improvements:
Use 4.3-inch IPS TFT LCD & resistive touch screen, with a larger view angle and can be seen clearly outdoor.
Use large capacity 5000mAh/3.7V lithium battery, standby time is longer, and expand a USB interface. Usually, it can be used as a power bank when the instrument is not used.
The Lipo Charing IC to changed to IP5306(with 2A high charing current) , make the charging time shorter.
Use a larger and better operating level.
Support Chinese and English menu switching;
Upgrade the user program(firmware) by virtual U disk(16MB SPI Flash Memory Inside).
Standard aluminium case to protect SMA head and reduce the interference of external electromagnetic wave to instrument.
Basic Performance
Measuring frequency | 50kHz~1000MHz | ||||||||
RF output | -13dbm (max. - 9dbm) | ||||||||
Frequency accuracy | <0.5ppm | ||||||||
Port SWR | <1.1 | ||||||||
Display | 4.3" IPS TFT(800x480) | ||||||||
Output capability | 5V/1A | ||||||||
USB interface | USB Type-C | ||||||||
Power consumption | 5000mAh / 3.7V battery | ||||||||
Number of scan points | 101 | ||||||||
Display trace | Up to 4 | ||||||||
Marker points | Up to 4 | ||||||||
Calibration result | Up to 5 groups | ||||||||
Scanning time | 1.9s/ every time |
Appearance Of NanoVNA-F Products
Hardware Block Diagram
Host Software
NanoVNASharp v1.0.3(by Hugen)
Nanovna-saver(by Rune B. Broberg)
Technical Documentation
NanoVNA-saver(by Rune B. Broberg)
Software Update
NanoVNA-F Purchase Guide
AliExpress Official Store : https://hamelec.aliexpress.com/store/5261225
Taobao store : https://shop243428585.taobao.com/