RF Demo Kit RF Test Board

RF Demo Kit is the RF test board of nanovna, with the size of 10 * 10cm, which is used for learning vector network analyzer.

If you are a Chinese user, please go to the only Taobao store to buy.
You can get one on AliExpress SYSJOINT Store and we support shipping to most parts of the world.

Smith chart printed on the back can be used to learn to read Smith chart and learn the basic principle of impedance matching.

The test parameters of the test board pattern are described as follows. Before the test, there must be two steps:

1. Connect the two attached 20cm SMA to IPEX adapters to the nanovna-f machine.

2. Recalibrate the machine using the 13 short circuit, 14 open circuit, 15 load, 16 through circuit on the test board and store the parameter in 0.

2. RLC series parallel circuit

3. 33 Ω resistance

4. 75 Ω resistance

5. 6.5MHz ceramic notch filter

6. 10.7MHz ceramic notch filter

7. RC series circuit

 8. LC series circuit

9. Capacitance

10. Inductance

11. 400MHz Low Pass Filter

12. 500MHz High Pass Filter

13. Short Circuit

14. Open Circuit

15. 50 Ω load

16. Thruogh Circuit

17. 10dB Attenuation Circuit

18. 3dB Attenuation Circuit